Check Seat Heater Relay
- CHECK SEAT HEATER RELAY
.
- Remove the seat heater relay from the relay holder.
- Measure the resistance between seat heater relay terminals.
Preparation tool:
Circuit tester
Terminal No. Inspection conditions Standard Circuit 6 - 7 Always 1 MΩ or more 6 - 7 Apply battery voltage between terminals 8 and 9. Less than 1 Ω Does the resistance indicate the standard value?
- Yes: The relay is normal.
- No: Replace the seat heater relay if the result is not within the standard value. Ref. to SEATS>Seat Heater System>REMOVAL>SEAT HEATER RELAY AND FUSE .