LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Forester 2.0XT Touring >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System - Seats >> Seat Heater System >> Removal >> Seat Heater Relay And Fuse

Seat Heater Relay And Fuse

  1. Disconnect the ground cable from battery and wait for at least 60 seconds before starting work. Ref. to NOTE>NOTE>BATTERY .
    NOTE: For model with battery sensor, disconnect the ground terminal from battery sensor.
  2. Remove the cover assembly - instrument panel LWR driver. Ref. to EXTERIOR/INTERIOR TRIM>Instrument Panel Lower Cover>REMOVAL .
  3. Remove the glove box assembly. Ref. to EXTERIOR/INTERIOR TRIM>Glove Box>REMOVAL .
  4. Remove the seat heater relay and fuse.
    1. Remove the relay & fuse box bolts.
    2. Remove the seat heater relay from the relay holder.
Fig 1: Seat Heater Relay And Fuse Location
G11268888Courtesy of SUBARU OF AMERICA, INC.
Relay & fuse box Fuse 7.5 A (remote control mirror) (A)
Fuse 15 A (seat heater) (B)
Relay holder RH Seat heater relay (C)
scientia non olet · About LEMON Manuals