LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Forester 2.0XT Touring >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Illumination Lights >> Lighting System >> Tail/Stop Light Bulb >> Inspection

Tail/Stop Light Bulb: Inspection

  1. Visually check the bulb for blow out.
  2. Check the bulb specification. Ref. to LIGHTING SYSTEM>General Description>SPECIFICATION .
  3. Replace the bulb if it is found defective.
    NOTE: Since LED (Light Emitting Diode) is used for the stop light, replace the light assembly - rear combination if it does not illuminate normally after installation.
scientia non olet · About LEMON Manuals