LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Forester 2.0XT Touring >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Eyesight System >> Camera Adjustment, Inspection >> Procedure >> Shim Adjustment

Shim Adjustment

  1. Turn the ignition switch to OFF.
  2. Detach the stereo camera cover assembly, and remove the stereo camera. Ref. to EyeSight>Stereo Camera>REMOVAL .
  3. Remove the stereo camera plate, and insert the shim into the vehicle body and camera plate.

    Preparation items: 

    Shim (washer): Part No. 031105000

    NOTE:
    • Inserting the shim into the vehicle front side makes camera downward.
    • Inserting the shim into the vehicle rear side makes camera upward.
    • There is a case that the shim may be inserted at the production line, but it is not abnormal.
  4. Install the stereo camera plate.

    Tightening torque: 

    5.5±1N.m (0.56±0.1 kgf-m, 4.1±0.7 ft-lb)

  5. Install the stereo camera and stereo camera cover assembly. Ref. to EyeSight>Stereo Camera>INSTALLATION .
  6. Perform the camera all adjustment mode (replacement/removal). Ref. to EyeSight>Camera Adjustment, Inspection>PROCEDURE>CAMERA ALL ADJUSTMENT MODE (REPLACEMENT/REMOVAL) .
scientia non olet · About LEMON Manuals