LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2016 >> Crosstrek Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Starting System / Charging Systems (Hybrid)) >> Integrated Starter Generator (ISG) >> Inspection >> Check Charge Warning Light

Check Charge Warning Light

WARNING: This page is about a different car, the 2015 Subaru XV Crosstrek. However, it is still accessible from the selected car via links, so may be relevant.

Inspect as follows, if the charge warning light illuminates.

Step Check Yes No
1 CHECK DTC.  Is DTC of HEV and IDI displayed? < Ref. to READ DIAGNOSTIC TROUBLE CODE (DTC) .> < Ref. to READ DIAGNOSTIC TROUBLE CODE (DTC) .> Check the appropriate DTC using the "List of Diagnostic Trouble Code (DTC)". < Ref. to LIST OF DIAGNOSTIC TROUBLE CODE (DTC) .> < Ref. to LIST OF DIAGNOSTIC TROUBLE CODE (DTC) .> Go to step .
2 CHECK ISG SENSOR. 
  1. Turn the ignition switch to OFF and wait for 20 minutes.
  2. Start the engine.
  3. Check the warning light in the combination meter.
Does the warning light illuminate? Go to step . Temporary overheat occurs in ISG. Currently returned to normal.
3 CHECK COMBINATION METER. 
  1. Check the combination meter. < Ref. to OPERATION , System Operation Check Mode.>
Is combination meter OK? Replace ISG. < Ref. to REMOVAL , Integrated Starter Generator (ISG).> Repair or replace the combination meter. < Ref. to INSPECTION , Combination Meter System.>