LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Legacy Premium, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Manual Transaxle & Differential) >> Main Shaft Assembly for Single-Range >> Removal

Main Shaft Assembly for Single-Range: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the manual transmission assembly from the vehicle. Refer to REMOVAL .
  2. Remove the transfer case together with the extension case assembly. Refer to REMOVAL .
  3. Remove the drive pinion shaft assembly. Refer to REMOVAL .
  4. Remove the main shaft assembly for single-range.
scientia non olet · About LEMON Manuals