Scalp Cap: Replacement

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Remove the mirror. < Refer to REPLACEMENT , Outer Mirror. >
Press-in the clips (A) from inside of outer mirror.

Fig 1: Locating Outer Mirror Clips
Courtesy of SUBARU OF AMERICA, INC.
Pull the scalp cap towards the front of the outer mirror, then remove the scalp cap.
CAUTION: Be careful not to apply excessive force when removing the scalp cap, as the lower hooks may become damaged.
Align clip (A) on the reverse side of the scalp cap and the clip attachment hole of the outer mirror, and push the scalp cap in.

Fig 2: Identifying Outer Mirror Clips
Courtesy of SUBARU OF AMERICA, INC.
Install the scalp cap securely.