Outer Mirror: Replacement
WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
- When removing the mirror, be careful not to damage the back surface of mirror with a flat tip screwdriver.
- When installing the mirror, insert the fitting area securely.
- Face the mirror upward.
- Disconnect the ground cable from battery. (Model with mirror heater)
- Lift the lower part of the mirror and the outer side, and remove fitting (1) and (2).
- Disconnect the mirror heater connector. (Model with mirror heater)
- Attach a mirror to the fitting area (1), and attach the worm to the fitting area (2).CAUTION: When installing the mirror, insert the worm securely.