Front Wiper Motor and Link: Removal

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the ground cable from the battery.
Remove the cowl panel. < Refer to REMOVAL , Cowl Panel. >
Disconnect the connector of motor.
Remove the bolt, and remove the wiper link.

Fig 1: Locating Wiper Link Bolts
Courtesy of SUBARU OF AMERICA, INC.
Remove the TORX® bolt and nuts, and remove the wiper motor assembly.

Fig 2: Locating Wiper Motor Assembly TORX(R) Bolt And Nuts
Courtesy of SUBARU OF AMERICA, INC.

Fig 3: Locating Motor Mounting Nut
Courtesy of SUBARU OF AMERICA, INC.