DTC 5D Curtain Airbag Sensor LH False Installation: DTC Detecting Condition

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Curtain airbag sensor LH is misinstalled.

Step	Check	Yes	No
1 REPLACE CURTAIN AIRBAG SENSOR (LH). Turn the ignition switch to OFF, disconnect the battery ground cable, and wait for 60 seconds or more. Replace the curtain A/B sensor (LH) with a genuine sensor. < Refer to REMOVAL , Curtain Airbag Sensor. >	Does the warning light go off?	Finish the diagnosis.	Replace the airbag control module. < Refer to REMOVAL , Airbag Control Module. >