LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Legacy Premium, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (Air Bag System) >> Curtain Airbag Sensor >> Removal

Curtain Airbag Sensor: Removal

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch to OFF.
  2. Disconnect the ground cable from battery and wait for at least 60 seconds before starting work.
  3. Remove the rear seat cushion assembly and seatback shoulder. < Refer to REMOVAL , Rear Seat. >
  4. Remove the nuts and then remove the curtain airbag sensor.
    Fig 1: Identifying Curtain Airbag Sensor Nuts
    G05663292Courtesy of SUBARU OF AMERICA, INC.
  5. Disconnect the airbag connector.
scientia non olet · About LEMON Manuals