LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Legacy Premium, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Exterior Body Panels) >> Front Fender >> Removal >> Front Fender Panel

Front Fender Panel

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground cable from battery.
  2. Remove the side sill spoilers.< Refer to REMOVAL , Side Sill Spoiler. >
  3. Remove the front bumper face.< Refer to FRONT BUMPER FACE , REMOVAL, Front Bumper. >
  4. Remove the headlight assembly.< Refer to REMOVAL , Headlight Assembly. >
  5. Remove the mud guard.< Refer to REMOVAL , Mud Guard. >
  6. Detach the tabs and remove the cowl panel, side.
    Fig 1: Identifying Cowl Side Panel Front Tabs
    G07680527Courtesy of SUBARU OF AMERICA, INC.
    1. Detach tabs (A), (B), and (C) from the vehicle exterior.
    2. Detach tabs (D) and (E).
  7. Remove the bolt, and remove the front fender panel.
    Fig 2: Identifying Front Fender Panel And Bolts
    G05958172Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals