Section 31 (Engine Mechanical (H4DO)): V-belt: Removal: V-Belt

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Remove the V-belt covers.

Fig 1: Locating V-Belt Cover Bolt
Courtesy of SUBARU OF AMERICA, INC.
Remove the air intake duct (rear). < Refer to REMOVAL , Air Intake Duct. >
Attach the tool to the V-belt tensioner assembly, and rotate the tool clockwise to loosen and remove the V-belt.

Fig 2: Removing V-Belt Using Tool
Courtesy of SUBARU OF AMERICA, INC.