LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Legacy Premium, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 31 (Engine Mechanical (H4DO)) >> Chain Cover >> Disassembly

Chain Cover: Disassembly

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the oil filler cap.
  2. Remove the engine oil filter and the oil pump union. < Refer to REMOVAL , Engine Oil Filter. >
  3. Remove the oil pressure switch. < Refer to REMOVAL , Oil Pressure Switch. >
  4. Remove the engine oil temperature sensor. < Refer to REMOVAL , Engine Oil Temperature Sensor. >
  5. Remove the oil control solenoid. < Refer to REMOVAL , Oil Control Solenoid. >
    Fig 1: Locating Oil Filler Cap
    G08316938Courtesy of SUBARU OF AMERICA, INC.
  6. Remove the camshaft position sensor. < Refer to REMOVAL , Camshaft Position Sensor. >
  7. Remove the actuator cover from chain cover.
    Fig 2: Locating Actuator Cover Bolts
    G08562961Courtesy of SUBARU OF AMERICA, INC.
  8. Remove the sensor cover from chain cover.
    Fig 3: Locating Sensor Cover Bolts
    G08562962Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals