Hose and Pipe: Installation
WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
- Replace the O-rings with new parts.
- When connecting hoses, do not apply an excessive force to them. After installing, check that no torsion or excessive tension applied to the hoses.
- Install each part in the reverse order of removal.
- Charge refrigerant. < Refer to
PROCEDURE , Refrigerant Charging Procedure. >
Tightening torque:
Refer to "COMPONENT" of "General Description". < Refer to AIR CONDITIONING UNIT , COMPONENT, General Description. >