Front Axle: Disassembly

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Remove the four bolts from the housing (A), and remove the front hub unit bearing and disc cover.

Fig 1: Locating Housing Bolts
Courtesy of SUBARU OF AMERICA, INC.
CAUTION:
- Do not get closer the tool which charged magnetism to magnetic encoder.
- Be careful not to damage the magnetic encoder.
  
  Fig 2: Identifying Magnetic Encoder And Front Hub Unit Bearing
  Courtesy of SUBARU OF AMERICA, INC.
Disassemble the front hub unit bearing. < Refer to DISASSEMBLY , Front Hub Unit Bearing. >