Front Hub Unit Bearing: Disassembly

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Using the ST and a hydraulic press, push out the hub bolts.

CAUTION:

Be careful not to hammer the hub bolts. This may deform the hub.
Do not reuse the hub bolt.

ST 28399AG000 HUB STAND

NOTE: Since the hub unit bearing (1) can not be disassembled, only hub bolts can be removed.

Fig 1: Pushing Out Hub Bolts Using ST

Courtesy of SUBARU OF AMERICA, INC.