Front Axle: Assembly

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Assemble the front hub unit bearing. < Refer to ASSEMBLY , Front Hub Unit Bearing. >
Place the disc cover between housing (A) and front hub unit, and tighten the four bolts.
Tightening torque:

65 N.m (6.63 kgf-m, 47.9 ft-lb)

Fig 1: Locating Housing Bolts
Courtesy of SUBARU OF AMERICA, INC.
CAUTION:
- Do not get closer the tool which charged magnetism to magnetic encoder.
- Be careful not to damage the magnetic encoder.
  
  Fig 2: Identifying Magnetic Encoder And Front Hub Unit Bearing
  Courtesy of SUBARU OF AMERICA, INC.