LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Legacy Premium, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Parking Brake System) >> Parking Brake Cable >> Removal

Parking Brake Cable: Removal

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear seat cushion. < Refer to REMOVAL , Rear Seat. >
  2. Remove the console box. < Refer to REMOVAL , Console Box. >
  3. Remove the parking cable adjusting nut (self-locking nut).
  4. Remove the parking brake lever. < Refer to REMOVAL , Parking Brake Lever. >
  5. Roll up the floor mat, remove the nuts, and then remove the clamps.
    Fig 1: Identifying Parking Brake Cable Mounting Bolts
    G05957227Courtesy of SUBARU OF AMERICA, INC.
  6. Remove the inner cable end (2) from the equalizer (1).
    Fig 2: Identifying Inner Cable End And Equalizer
    G07681229Courtesy of SUBARU OF AMERICA, INC.
  7. Lift up the vehicle, and then remove the rear wheels.
  8. Remove the parking brake cable from rear brake. < Refer to REMOVAL , Parking Brake Assembly (Rear Disc Brake). >
  9. Remove the clamp from the rear brake.
  10. Remove the cable clamp from the rear arm bracket.
  11. Remove the bolt and detach the cable clamp from the rear floor.
    Fig 3: Identifying Rear Floor Cable Clamp Mounting Bolts
    G05659509Courtesy of SUBARU OF AMERICA, INC.
  12. Remove the grommet from the rear floor, and remove the cable assembly.
scientia non olet · About LEMON Manuals