Parking Brake Lever: Removal

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Set the wheel stoppers to tires.
Remove the console box. < Refer to REMOVAL , Console Box. >
Disconnect the parking brake switch connector.
Remove the parking cable adjusting nut (self-locking nut).
Remove the bolt, and then detach the parking brake lever.

Fig 1: Identifying Parking Brake Lever Mounting Bolts
Courtesy of SUBARU OF AMERICA, INC.