Water Pump Pulley

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the ground cable from battery.

Fig 1: Connecting/Disconnecting Battery Ground Terminal
Courtesy of SUBARU OF AMERICA, INC.
Remove the V-belts. < Refer to REMOVAL , V-belt. >
Remove the main fan motor assembly. < Refer to REMOVAL , Radiator Main Fan and Fan Motor. >
Lift up the vehicle.
Remove the under cover. < Refer to REMOVAL , Front Under Cover. >
Remove the water pump pulley using the ST.
ST1 18355AA000 PULLEY WRENCH

ST2 18334AA030 PULLEY WRENCH PIN SET

Fig 2: Removing Water Pump Pulley Using ST
Courtesy of SUBARU OF AMERICA, INC.