LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2013 >> Legacy Premium, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Engine Cooling System (H4DO)) >> Radiator Main Fan and Fan Motor >> Removal

Radiator Main Fan and Fan Motor: Removal

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground cable from battery.
    Fig 1: Connecting/Disconnecting Battery Ground Terminal
    G08570271Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the reservoir tank. < Refer to REMOVAL , Reservoir Tank. >
  3. Disconnect the connector from the main fan motor assembly.
    Fig 2: Locating Main Fan Motor Assembly Connector
    G08563323Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the ATF radiator hose from the clip of the radiator main fan shroud. (AT model)
  5. Remove the bolts which hold the radiator main fan shroud onto the radiator.
    Fig 3: Locating Radiator Main Fan Shroud Bolts
    G08563324Courtesy of SUBARU OF AMERICA, INC.
  6. Remove the radiator main fan and fan motor from vehicle.
scientia non olet · About LEMON Manuals