Front Side Belt

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Remove the collector cover.
Remove the air intake duct (Rear). < Refer to REMOVAL , Air Intake Duct. >
Remove the collector cover bracket.

Fig 1: Locating Collector Cover Bracket Mounting Bolts
Courtesy of SUBARU OF AMERICA, INC.
Loosen the bolt (A).
Loosen the slider bolt (B).
Remove the front side belt (C).

Fig 2: Identifying Front Side Belt And Slider Mounting Bolts
Courtesy of SUBARU OF AMERICA, INC.