Front Axle: Assembly

Assemble the front hub unit bearing. Refer to ASSEMBLY .
Install the front axle housing (a) and front hub unit bearing (c) to the disc brake cover (b) as shown in the figure, and tighten the bolt.

Fig 1: Identifying Front Axle Housing, Front Hub Unit Bearing And Disc Brake Cover
Courtesy of SUBARU OF AMERICA, INC.

Tightening torque:

65 N.m (6.63 kgf-m, 47.9 ft-lb)
CAUTION:
- Do not get closer the tool which charged magnetism to magnetic encoder.
- Be careful not to damage the magnetic encoder.
  
  Fig 2: Identifying Magnetic Encoder And Front Hub Unit Bearing
  Courtesy of SUBARU OF AMERICA, INC.