Cam Sprocket LH

WARNING: This page is about a different variant/trim than selected.

Intake cam sprocket LH
1. Install the intake cam sprocket LH by aligning the knock hole (A) of intake cam sprocket LH and the knock pin (B) of intake camshaft LH.
  NOTE: Before installation, check that there is no foreign matter on the intake cam sprocket LH and intake camshaft LH.
  
  Fig 1: Identifying Intake Cam Sprocket LH Knock Hole And Knock Pin
  Courtesy of SUBARU OF AMERICA, INC.
2. Hold the intake cam sprocket LH using the ST1 and ST2, and install the bolts using the ST3.
  ST1 18355AA000 PULLEY WRENCH
  
  ST2 18334AA030 PULLEY WRENCH PIN SET
  
  ST3 18270KA010 SOCKET
  
  Tightening torque:
  
  18 N.m (1.8 kgf-m, 13.3 ft-lb)
  
  Fig 2: Installing Intake Cam Sprocket LH Bolts
  Courtesy of SUBARU OF AMERICA, INC.
3. Install timing chain LH. < Refer to TIMING CHAIN LH , INSTALLATION, Timing Chain Assembly. >
4. Install the chain cover. < Refer to INSTALLATION , Chain Cover. >
Exhaust cam sprocket LH
1. Install the exhaust cam sprocket LH by aligning the knock hole (A) of exhaust cam sprocket LH and the knock pin (B) of exhaust camshaft LH.
  NOTE: Before installation, check that there is no foreign matter on the exhaust cam sprocket LH and exhaust camshaft LH.
  
  Fig 3: Identifying Exhaust Cam Sprocket LH Knock Hole And Knock Pin
  Courtesy of SUBARU OF AMERICA, INC.
2. Hold the exhaust cam sprocket LH using the ST1 and ST2, and install the bolts using the ST3.
  ST1 18355AA000 PULLEY WRENCH
  
  ST2 18334AA020 PULLEY WRENCH PIN SET
  
  ST3 18270KA010 SOCKET
  
  Tightening torque:
  
  18 N.m (1.8 kgf-m, 13.3 ft-lb)
  
  Fig 4: Installing Exhaust Cam Sprocket LH Bolts Using ST
  Courtesy of SUBARU OF AMERICA, INC.
3. Install timing chain LH. < Refer to TIMING CHAIN LH , INSTALLATION, Timing Chain Assembly. >
4. Install the chain cover. < Refer to INSTALLATION , Chain Cover. >