A: Removal

NOTE: Refer to "Security and Locks" article for key cylinder replacement. < Refer to GLOVE BOX LID , REPLACEMENT, Key Lock Cylinders. >

Disconnect the ground cable from battery.
Remove the glove box damper.

Fig 1: Identifying Glove Box Damper
Courtesy of SUBARU OF AMERICA, INC.
Remove the stoppers and pull the glove box lid assembly forward to remove.

Fig 2: Locating Glove Box Lid Assembly Stoppers
Courtesy of SUBARU OF AMERICA, INC.
Remove the clips, and remove the glove box lower cover.

Fig 3: Identifying Glove Box Lower Cover
Courtesy of SUBARU OF AMERICA, INC.
Remove the instrument panel lower. < Refer to INSTRUMENT PANEL LOWER , REMOVAL, Center Console. >