Glove Box Lid

Remove the glove box damper.

Fig 1: Identifying Glove Box Damper
Courtesy of SUBARU OF AMERICA, INC.
Remove the stoppers and pull the glove box lid assembly forward to remove.

Fig 2: Locating Glove Box Lid Assembly Stoppers
Courtesy of SUBARU OF AMERICA, INC.
Pull up the lock knob with the key cylinder in UNLOCK.

Fig 3: Pulling Up Lock Knob With Key Cylinder In UNLOCK
Courtesy of SUBARU OF AMERICA, INC.
Insert the key while holding the condition of step 3), and pull out the key in LOCK status.

Fig 4: Inserting Key While Holding Key Cylinder
Courtesy of SUBARU OF AMERICA, INC.
Remove the key cylinder from lock knob while pushing in the metal plate, and replace the key cylinder.

Fig 5: Locating Key Cylinder And Lock Knob
Courtesy of SUBARU OF AMERICA, INC.