LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2011 >> Legacy Premium, Automatic CVT >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Engine Mechanical (H4DOTC)) >> Crank Sprocket >> Removal

Crank Sprocket: Removal

WARNING: This page is about a different variant/trim than selected.
NOTE: When replacing a single part, perform the work with the engine installed to body.
  1. Remove the crank pulley. Refer to , REMOVAL , Crank Pulley.
  2. Remove the timing belt cover. Refer to , REMOVAL , Timing Belt Cover.
  3. Remove the timing belt. Refer to , REMOVAL , Timing Belt.
  4. Remove the crank sprocket.
    Fig 1: Locating Crank Sprocket
    G07911987Courtesy of SUBARU OF AMERICA, INC.