LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2011 >> Legacy Premium, Automatic CVT >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Engine Mechanical (H4DOTC)) >> Crank Pulley >> Removal

Crank Pulley: Removal

WARNING: This page is about a different variant/trim than selected.
NOTE: When replacing the single part, perform the work with the engine installed to vehicle body.
  1. Remove the V-belts. Refer to , REMOVAL , V-belt.
  2. Use the ST to lock the crank pulley, and remove the crank pulley bolt.

    ST 499977100 CRANK PULLEY WRENCH

    Fig 1: Installing Crank Pulley Using Crank Pulley Wrench
    G06650702Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the crank pulley.
scientia non olet · About LEMON Manuals