LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2011 >> Legacy Premium, Automatic CVT >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Engine Mechanical (H4DOTC)) >> Cam Sprocket >> Removal

Cam Sprocket: Removal

WARNING: This page is about a different variant/trim than selected.
NOTE: When replacing the single part, perform the work with the engine installed to vehicle body.
  1. Remove the crank pulley. Refer to , REMOVAL , Crank Pulley.
  2. Remove the timing belt cover. Refer to , REMOVAL , Timing Belt Cover.
  3. Remove the timing belt. Refer to , REMOVAL , Timing Belt.
  4. Remove the actuator covers of intake cam sprocket and exhaust cam sprocket.
  5. Use the ST to lock the cam sprocket, and remove the cam sprocket bolt.

    ST 499977500 CAM SPROCKET WRENCH

    Fig 1: Locking Cam Sprocket And Install Cam Sprocket Bolt
    G06649388Courtesy of SUBARU OF AMERICA, INC.
  6. Remove the cam sprocket.
scientia non olet · About LEMON Manuals