Crank Pulley: Removal

WARNING: This page is about a different variant/trim than selected.

NOTE: When replacing the single part, perform the work with the engine installed to body.

Remove the V-belts. Ref. to REMOVAL , V-belt.
Remove the crank pulley cover.

Fig 1: Identifying Crank Pulley Cover
Courtesy of SUBARU OF AMERICA, INC.
Use the ST to lock the crank pulley, and remove the crank pulley bolt.
ST1 18355AA000 PULLEY WRENCH

ST2 18334AA000 PULLEY WRENCH PIN SET

Fig 2: Removing Crank Pulley Bolt Using ST
Courtesy of SUBARU OF AMERICA, INC.
Remove the crank pulley.