LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2010 >> Legacy Premium, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Continuously Variable Transmission) >> Transfer Reduction Driven Gear >> Removal

Transfer Reduction Driven Gear: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the transmission assembly from the vehicle. Ref. to REMOVAL , Automatic Transmission Assembly.
  2. Remove the front wheel speed sensor, and remove the extension case. Ref. to REMOVAL , Extension Case.
  3. Remove the transfer clutch assembly. Ref. to REMOVAL , Transfer Clutch.
  4. Remove the transfer reduction driven gear assembly.
Fig 1: Identifying Transfer Reduction Driven Gear Assembly
G06654532Courtesy of SUBARU OF AMERICA, INC.