LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2010 >> Legacy Premium, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Engine Cooling System - Cooling (H6DO - 3.6L DOHC)) >> Engine Coolant >> Replacement >> Draining Of Engine Coolant

Draining Of Engine Coolant

WARNING: This page is about a different variant/trim than selected.
  1. Lift up the vehicle.
  2. Remove the under cover. Ref. to REMOVAL , Front Under Cover.
  3. Remove the drain plug to drain engine coolant into container.
    NOTE: Remove the radiator cap so that engine coolant will drain faster.
    Fig 1: Locating Engine Coolant Radiator Cap
    G06651495Courtesy of SUBARU OF AMERICA, INC.
  4. Install the drain plug.
  5. Install the under cover. Ref. to INSTALLATION , Front Under Cover.