LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2007 >> B9 Tribeca Base >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Accessory Drive Belts >> Engine Mechanical (H6DO) >> Crank Pulley >> Removal

Crank Pulley: Removal

NOTE: Perform the work with the engine installed to body when replacing a single part.
  1. Remove the V-belts. <Ref. to REMOVAL , V-belt .>
  2. Remove the crank pulley cover.
    Fig 1: Identifying Crank Pulley Cover
    G05018695Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the crank pulley bolt. To lock the crankshaft, use ST.

    ST 499977100 CRANK PULLEY WRENCH

    Fig 2: Identifying Crank Pulley Bolt
    G05018696Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the crank pulley.
scientia non olet · About LEMON Manuals