LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Legacy GT spec.B >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Automatic Transmission 4AT) >> Reduction Drive Gear >> Removal

Reduction Drive Gear: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the transmission assembly from vehicle body. < Ref. to REMOVAL , Automatic Transmission Assembly. >
  2. Remove the rear wheel speed sensor, and separate the extension case from transmission case. < Ref. to REMOVAL , Extension Case. >
  3. Remove the reduction driven gear. < Ref. to REMOVAL , Reduction Driven Gear. >
  4. Using the ST, extract the reduction drive gear.

    ST1 499737100 PULLER

    ST2 899524100 PULLER SET

    Fig 1: Identifying Reduction Drive Gear
    G05021918Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals