LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Legacy GT spec.B >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Automatic Transmission 4AT) >> Parking Pawl >> Removal

Parking Pawl: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the transmission assembly from vehicle body. < Ref. to REMOVAL , Automatic Transmission Assembly. >
  2. Remove the rear wheel speed sensor, and separate the extension case from transmission case. < Ref. to REMOVAL , Extension Case. >
  3. Remove the reduction drive gear. < Ref. to REMOVAL , Reduction Drive Gear. >
  4. Remove the parking pawl, return spring and shaft.
    Fig 1: Identifying Parking Pawl, Return Spring And Shaft
    G05021924Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals