LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Legacy GT spec.B >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Engine Mechanical (H4SO)) >> Crank Sprocket >> Installation

Crank Sprocket: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install the crank sprocket.
    Fig 1: Aligning Crank Sprocket Marks
    G04997667Courtesy of SUBARU OF AMERICA, INC.
  2. Install the timing belt. < Ref. to INSTALLATION , Timing Belt. >
  3. Install the timing belt cover.

    < Ref. to INSTALLATION , Timing Belt Cover. >

  4. Install the crank pulley. < Ref. to INSTALLATION , Crank Pulley. >
  5. Install the V-belts. < Ref. to INSTALLATION , V-belt. >
scientia non olet · About LEMON Manuals