LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Legacy GT spec.B >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Engine Mechanical (H4SO)) >> Cam Sprocket >> Removal

Cam Sprocket: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the V-belts. < Ref. to REMOVAL , V-belt. >
  2. Remove the crank pulley. < Ref. to REMOVAL , Crank Pulley. >
  3. Remove the timing belt cover. < Ref. to REMOVAL , Timing Belt Cover. >
  4. Remove the timing belt. < Ref. to REMOVAL , Timing Belt. >
  5. Remove the camshaft position sensor. < Ref. to REMOVAL , Camshaft Position Sensor. >
  6. Remove the cam sprockets No. 1 and No. 2. To lock the camshaft, use the ST.

    ST 18231AA010 CAM SPROCKET WRENCH

    NOTE: CAM SPROCKET WRENCH (499207100) can also be used.
    Fig 1: Removing Cam Sprocket No. 2 Using Cam Sprocket Wrench ST (499207100)
    G04997663Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals