Throttle Body: Removal

WARNING: This page is about a different car, the 2006 Subaru Outback. However, it is still accessible from the selected car via links, so may be relevant.

Remove the collector cover.
Disconnect the ground cable from battery.

Fig 1: Disconnecting Ground Cable From Battery
Remove the air intake chamber. < Ref. to REMOVAL , Air Intake Chamber. >
Disconnect the connectors from the throttle position sensor.

Fig 2: Locating Connector
Disconnect the engine coolant hoses (A) from throttle body.
Remove the bolts (B) which secure throttle body to intake manifold.

Fig 3: Identifying Engine Coolant Hoses And Bolts