LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Legacy GT spec.B >> Repair and Diagnosis >> External Pages >> Different car >> Section 57 (Intake (Induction) (H6DO)) >> Air Intake Chamber >> Removal

Air Intake Chamber: Removal

WARNING: This page is about a different car, the 2006 Subaru Outback. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the collector cover.
  2. Loosen the clamp (A) which connects air intake chamber to throttle body.
  3. Loosen the clamp (B) which connects intake duct to air intake chamber.
  4. Remove the bolt (C) which secures air intake chamber to the stay.
    Fig 1: Identifying Clamp And Bolt Securing Air Intake Chamber
    G05018623
  5. Disconnect the blow-by hoses, then remove the air intake chamber.
scientia non olet · About LEMON Manuals