LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Legacy GT spec.B >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Fuel Injection (Fuel Systems) (H6DO)) >> Crankshaft Position Sensor >> Removal

Crankshaft Position Sensor: Removal

WARNING: This page is about a different car, the 2006 Subaru Outback. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the collector cover.
  2. Disconnect the ground cable from battery.
    Fig 1: Disconnecting Ground Cable From Battery
    G05019586
  3. Remove the air intake chamber. < Ref. to REMOVAL , Air Intake Chamber. >
  4. Remove the service hole cover.
    Fig 2: Locating Service Hole Cover
    G05018438
  5. Remove the crankshaft position sensor.
    Fig 3: Locating Crankshaft Position Sensor
    G05018439
  6. Disconnect the connector from crankshaft position sensor.
scientia non olet · About LEMON Manuals