Oil Switching Solenoid Valve: Removal
WARNING: This page is about a different car, the 2006 Subaru Outback. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the ground cable from battery.
- Remove the air intake chamber.
< Ref. to REMOVAL , Air Intake Chamber7. >
- Disconnect the connector from the oil switching solenoid valve.
- Remove the oil switching solenoid valve.
- Remove the variable valve lift diagnosis oil pressure switch.
< Ref. to REMOVAL , Variable Valve Lift Diagnosis Oil Pressure Switch. >
- Remove the oil temperature sensor.
< Ref. to REMOVAL , Oil Temperature Sensor. >
- Remove the oil switching solenoid valve holder from the cylinder head.