Fuel Temperature Sensor: Removal

WARNING: This page is about a different variant/trim than selected.

WARNING: During work procedures, if fuel tank is more than 3/4 full, be careful because fuel may spill.

NOTE: Fuel temperature sensor is built in fuel pump assembly.

Remove fuel pump assembly. < Ref. to REMOVAL , FUEL PUMP. >
Disconnect connector from fuel pump bracket.

Fig 1: Disconnecting Connector From Fuel Pump Bracket
Courtesy of SUBARU OF AMERICA, INC.
Remove fuel temperature sensor.
NOTE: When replacing fuel temperature sensor, also replace fuel level sensor. < Ref. to REMOVAL , FUEL LEVEL SENSOR. >

Fig 2: Locating Fuel Temperature Sensor
Courtesy of SUBARU OF AMERICA, INC.