Knock Sensor: Removal

WARNING: This page is about a different variant/trim than selected.

Disconnect ground cable from battery.

Fig 1: Disconnecting Ground Cable From Battery
Courtesy of SUBARU OF AMERICA, INC.
Remove air cleaner case.
< Ref. to REMOVAL , AIR CLEANER CASE. >
Disconnect knock sensor connector.

Fig 2: Disconnecting Knock Sensor Connector
Courtesy of SUBARU OF AMERICA, INC.
Remove knock sensor from cylinder block.

Fig 3: Identifying Knock Sensor
Courtesy of SUBARU OF AMERICA, INC.