Air Cleaner Case: Removal

WARNING: This page is about a different variant/trim than selected.

Disconnect the ground cable from battery.

Fig 1: Disconnecting Ground Cable From Battery
Courtesy of SUBARU OF AMERICA, INC.
Disconnect the connector (A) of intake air temperature sensor.
Remove the bolts (B) which install air cleaner case to stay.

Fig 2: Disconnecting Connector Of Intake Air Temperature Sensor
Courtesy of SUBARU OF AMERICA, INC.
Disconnect the hoses and intake duct from air cleaner case.
Loosen the clamp which connects air cleaner case to throttle body.

Fig 3: Loosening Air Cleaner Case Clamp
Courtesy of SUBARU OF AMERICA, INC.
Remove the air cleaner case.