LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Baja Turbo, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Fuel Injection (Fuel Systems) (H4SO)) >> Engine Coolant Temperature Sensor >> Removal

Engine Coolant Temperature Sensor: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect ground cable from battery.
    Fig 1: Disconnecting Ground Cable From Battery
    G04988132Courtesy of SUBARU OF AMERICA, INC.
  2. Remove air intake duct and air cleaner case.

    < Ref. to REMOVAL , AIR INTAKE DUCT > and < Ref. to REMOVAL , AIR CLEANER CASE. >

  3. Disconnect connector from engine coolant temperature sensor.
    Fig 2: Disconnecting Connector From Engine Coolant Temperature Sensor
    G04987904Courtesy of SUBARU OF AMERICA, INC.
  4. Remove engine coolant temperature sensor.