LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Baja Turbo, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 15 (Clutch System) >> Clutch Pipe and Hose >> Removal

Clutch Pipe and Hose: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the air cleaner case and air intake duct. < Ref. to REMOVAL , AIR CLEANER CASE (H4SO) > and < Ref. to REMOVAL , AIR INTAKE DUCT (H4SO). >
  2. Remove the intercooler. (TURBO model) < Ref. to REMOVAL , INTERCOOLER (H4DOTC). >
  3. Drain the clutch fluid. < Ref. to REPLACEMENT , CLUTCH FLUID. >
  4. Remove the clutch pipe from the clutch hose and master cylinder.
  5. Pull out the clamp, then remove the clutch hose from bracket.
    Fig 1: Identifying Clamp And Clutch Hose
    G04991082Courtesy of SUBARU OF AMERICA, INC.
  6. Remove the hose from operating cylinder.
  7. Remove the bracket.
scientia non olet · About LEMON Manuals