LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2005 >> Baja Base, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brakes - Mechanical >> Brake Pedal >> Installation

Brake Pedal: Installation

  1. Install in the reverse order of removal.
    CAUTION:
    • If cable clamp is damaged, replace it with a new one.
    • Never fail to cover outer cable end with boot.
    • Be careful not to kink accelerator cable.
    • Always use new clevis pins.
  2. Adjustment of clutch pedal < Ref. to , ASSEMBLY , Brake Pedal. >
  3. Inspect after pedal installation < Ref. to , INSPECTION , Brake Pedal. >
scientia non olet · About LEMON Manuals