LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2004 >> Baja Base, Standard >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Interior/Exterior Trim >> Exterior / Interior Trim >> Cargo Bed Upper Molding >> Removal

Cargo Bed Upper Molding: Removal

  1. Remove cargo bed side tray. Refer to REMOVAL , Cargo Bed Side Tray.
  2. Remove cargo bed side molding. Refer to REMOVAL , Cargo Bed Side Molding.
  3. Remove cargo bed C pillar molding. Refer to REMOVAL , Cargo Bed C Pillar Molding.
  4. Remove high-mounted stop light.
    Fig 1: Removing High-Mounted Stop Light
    G03510506Courtesy of SUBARU OF AMERICA, INC.
  5. Remove cap and bolt using TORX(R) bit T25.
    Fig 2: Removing Cap & Bolt
    G03510507Courtesy of SUBARU OF AMERICA, INC.
NOTE: Do not reuse the removed clips; use new ones.
scientia non olet · About LEMON Manuals