Remove/Install Wheels - AR40.10-P-1100SR

MODEL 453 

MODIFICATION NOTES

28.04.2017

Work procedure completely revised.

	Remove
1	Risk of death  caused by vehicle slipping or toppling off of the lifting platform.	Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.	AS00.00-Z-0010-01A
1	Lift vehicle on vehicle lift	Align the turn plates so that the screws of the rubber pads on the turn plates cannot come into contact with vehicle parts while jacking up.
2	Remove wheel trim	On vehicles with steel rims.
3	Unscrew wheel bolts and remove wheels	Do not use an impact wrench on light alloy wheels. Otherwise the light alloy wheels can be damaged.
	Check
4	Check condition of tires and look for signs of damage and crack formation
			AP40.10-P-4051EW
	Clean
5	Clean and check wheel bolt connection components, then protect against corrosion		AR40.10-P-1100-02A
		Assembly cleaner	*BR00.45-Z-1028-04A
		Paste, hot lubrication 1 kg, DBL 6879.20	*BR00.45-Z-1005-06A
	Install
6	Fit wheels and fully tighten wheel bolts	Do not use an impact wrench on light alloy wheels. Otherwise the light alloy wheels can be damaged.
7	Lower vehicle with vehicle lift
8	Tighten wheel bolts	Wheel bolt	*BA40.10-P-1001-01E
9	Attach hubcaps	On vehicles with steel rims.

WHEELS

Number	Designation		Model 453
BA40.10-P-1001-01E	Wheel bolt	Nm	105

REPAIR MATERIALS

Number	Designation	Order number
BR00.45-Z-1005-06A	Paste, hot lubrication 1 kg, DBL 6879.20	A 000 989 76 51
BR00.45-Z-1028-04A	Assembly cleaner	Adolf Wurth GmbH & Co. KG